装配式凸轮轴滚花连接机理及连接强度研究

装配式凸轮轴与传统凸轮轴相比具有重量轻、加工成本低、材料利用合理等优点。是新型的凸轮轴制造技术, 具有广泛的发展空间。而其连接方法是装配式凸轮轴制造的关键技术。本文基于相异材料的咬合连接理论, 提出了滚花式塑性变形连接机理, 对不同材料、尺寸的滚花式凸轮轴静连接强度及疲劳强度进行了实验研究, 同时分析了滚花连接的不同连接状况以及凸轮压装张紧应力。     

CREEP CRACK PROPAGATION IN CONVENTIONAL CAST AND DIRECTIONALLY SOLIDIFIED SUPERALLOY RENE 80

The creep crack propagation in superalloy René80 of two different microstructures,i.e.,equiaxed grain structure by conventional casting and columnar grain by directionalsolidification,was investigated under static load at 1123 K.The creep crack growth rate,da/dt,seems to be correlated with the stress intensity factor,K.The creep crack growth ratein the directionally solidified alloy is lower than that in the conventional cast alloy,owing tothe elimination of transverse grain boundaries.The effect of microstructure on creep crackpropagation has also been discussed.     

Microstructures and Plastic Anisotropy of As—Cast Low Carbon Steel Strips

对比研究了低碳钢带铸材不同处理状态钢带和薄板铸坯中不同位置切片的组织特征、晶体学织构和15％工程应变条件下的塑性异向性．结果表明，带铸材试样中存在{111}与{114}特征织构，织构强度均较弱；铸坯切片中存在{111}与{001}特征织构，并且因局部凝固冷速不同存在明显的织构强度差异．两组低碳钢的法向异向性与平均晶粒尺寸的对数之间尽管均存在线性关系，但斜率明显不同．分析表明法向异向性的晶粒尺寸依存性与钢带中织构的强弱有关，由此提出了“有效织构强度比”的概念，从塑性变形理论的角度解释了微观组织对塑性异向性的影响．     

厚向异性板应力应变强度表述方法讨论

从希尔 (Hill)正交各向异性体二次屈服函数出发 ,可以导出厚向异性板应力强度 (等效应力 )与应变强度 (等效应变 )的两组表达式 ;本文讨论了采用两组不同表述方法的选择 ,并利用单向拉伸与双向等拉两种实验作了可比性的分析比较     

确定电磁超声换能器钢管检测最佳磁化强度的试验研究

由于电磁超声换能器检测钢管缺陷时,其磁场强度影响超声波幅值,进而影响检测灵敏度。为此设计了确定最佳磁化强度的试验方案,通过试验得到超声波幅值随电磁场激励电流的变化曲线。确定了最佳磁化强度时的激励电流。     

Classification of cardiac sound signals using constrained tunable-Q wavelet transform

The features extracted from the cardiac sound signals are commonly used for detection and identification of heart valve disorders. In this paper, we present a new method for classification of cardiac sound signals using constrained tunable-Q wavelet transform (TQWT). The proposed method begins with a constrained TQWT based segmentation of cardiac sound signals into heart beat cycles. The features obtained from heart beat cycles of separately reconstructed heart sounds and murmur can better represent the various types of cardiac sound signals than that from containing both. Therefore, heart sounds and murmur have been separated using constrained TQWT. Then the proposed novel raw feature set has been created by the parameters that have been optimized while constraining the output of TQWT together with that of extracted by using time-domain representation and Fourier–Bessel (FB) expansion of separated heart sounds and murmur. However, the adaptively selected features have been used to obtain the final feature set for subsequent classification of cardiac sound signals using least squares support vector machine (LS-SVM) with various kernel functions. The performance of the proposed method has been validated with publicly available datasets and the results have been compared with the existing short-time Fourier transform (STFT) based method. The proposed method shows higher percentage classification accuracy of 94.01 as compared to 93.53 of STFT based method. In comparison with STFT based method, it is noteworthy that the proposed method uses well defined and lower dimensionality of feature vector that can reduce the computational complexity.     

用T621A石墨炭源合成出高强度金刚石

介绍了合成高强度(22．5kg～25．8kg)粗颗粒(40／50～25／30)单晶金刚石所需的炭源材料，触媒合金种类、装填方式、合成参数与合成效果。讨论了原料、合成工艺条件对生长高强度粗颗粒的优质金刚石的影响及合成机理。     

原子磁强计检测光闭环稳定系统设计

SERF态原子磁强计已实现人类历史上最高的0.16fT/Hz1/2的灵敏度。其检测方法主要是法拉第调制法。但法拉第调制法中光电流摄动或环境温度变化等干扰导致的检测光强的起伏会造成检测结果的不准确。为抑制检测光强起伏,设计了闭环原子磁强计检测光稳定系统。在法拉第调制法的基础上,增加了光路子系统和控制子系统对检测光强进行闭环稳定控制。通过对随机干扰进行闭环控制仿真与实验,验证本系统可以有效抑制各种干扰引起的光强起伏,使系统抗干扰能力提高1.2%,从而提高原子磁强计的检测精度。